Bridjit Car Ramp


The Bridjit Driveway Ramp for rolled curbs.

BRIDJIT Fits Any Width Driveway Entry
The BRIDJIT 3pc curb ramp set is 12 ft wide. Additional 4 ft. wide ramps can be added to expand the driveway coverage to any width. BRIDJIT’s modular design adjusts to fit around curved driveway entries.

BRIDJIT Is Easy to Install
Bridjit has an easy 2 person, 15 minute installation, and requires no special tools.

BRIDJIT Saves You Money
Bridjit minimizes the damage done to steering components and alignment caused by bouncing over rolled curbs. This helps maintain gas mileage & reduces maintenance costs and tire wear. Payback for your investment in BRIDJIT is estimated to be as little as one year or less.

BRIDJIT Saves Your Car and Your Body
Bridjit reduces driver & passenger back pain experienced while bumping over rolled curbs. Bridjit protects low profile tires and rims from damage. Low profile vehicles can now enter your driveway without scrapes and bumps.

BRIDJIT Is Neighborhood Friendly
Ramps have a full length waterway to allow for storm drainage, sloped ends ease vehicles up and over the ramp when parallel parking. BRIDJIT is easily flipped out of the way for periodic cleaning. BRIDJIT is not impacted by street sweepers.

BRIDJIT Is Versatile
BRIDJIT is also an excellent solution for golf carts, motorcycles, RVs, and boats.

BRIDJIT Curb Ramp at


What are the actual dimensions of each ramp section?
Each section nominally measures 48 in. long x 16 in. wide x 2 3/4 in. thick at the center, tapering to 3/4 thick at the top and bottom.

How do I determine the number of 4ft. BRIDJIT sections required for my driveway?
The number of 4 ft. sections required depends primarily on the width and depth of your driveway. A 2-car garage, with a driveway less than 2 cars deep, will require more sections, in that you do not have room to maneuver your cars to both sides of the driveway or garage. These additional sections can be added later, but we recommend a minimum of 4 sections if you have a 2-car garage with less than a 2-car deep driveway or a 3-car garage.

What joining method is used to keep the BRIDJIT sections together?
BRIDJIT comes supplied with 1/2in. x 71/2in. galvanized bolts, preinserted into the center sections. These bolts need to be driven into the adjoining section as shown in our instruction manual. Friction between the rubber and bolts keep the sections tight together, the supplied nuts are a fail safe step.

What keeps BRIDJIT in place during use?
BRIDJIT’s weight provides the stability required to keep the device in place, with little or no adjustment required during use. Mechanical fixing to the curb should not be required.

How does BRIDJIT allow for flow of water?
BRIDJIT has a full length 2 1/2in. waterway built into the underneath of the product, as well as angled ends which promotes excessive water to flow out and around the device, cleaning out debris.

How does BRIDJIT compensate for curved curbing as used in cul-de-sacs?
BRIDJIT was manufactured in 4ft sections to allow for curvature of the curbing. The longer connection bolts allow the device to make the turn, leaving what we believe is an acceptable wedge of space between sections as they fit in place.

What maintenance is required for the BRIDJIT product?
Depending greatly on the amount of construction or maintenance work done around the home or neighborhood, it is suggested that BRIDJIT be periodically flipped up out of the gutter (using two people), the gutter area swept up, and debris properly discarded.

What effect does exposure to the elements have on BRIDJIT?
BRIDJIT is made from ground up rubber tires and will in time tend to lose it’s luster, turning much the same color as the asphalt street, remaining durable for many years

What happens if someone is driving or parallel parking in the gutter?
We have sloped each end of BRIDJIT to allow easier access up and over the ends. This feature, along with the durability of the rubber material, should eliminate any concern.

Is street sweeper operation impacted?
We have been providing BRIDJIT RAMPS to our customers for 7 years and due to the weight and durability have had no adverse impact by street sweeping machinery.

How does Bridjit work if I have a storm sewer inlet/grate located within my driveway?
Depending on the exact right to left location of the grate and depth of your driveway Bridjit can still be utilized. You should never place the Bridjit ramp over the top of the grate. Please contact us at for possible solutions and provide a picture of your driveway if possible.